The projector lifter can be mounted flat on the conference table or suspended on the ceiling. The biggest highlight of this series of products is the double automatic door design. The double automatic door is hidden inside the body when the projector is working; when the projector is not working, the double automatic door is closed and flat with the table or ceiling, which does not affect the beauty and flatness of the table and ceiling. The product is small in size, beautiful in appearance, easy to install, simple in operation, stable and reliable in operation. It can be controlled manually, remotely and centrally.

Countertop paperback:

1. According to the projector lifter model, open the corresponding through holes and embedded holes on the table;

2. Carefully put the projector lifter into the hole, the lifter panel is level with the table;

3. The projection surface is directly placed on the lifting panel of the projector lifter;

4. The projector power supply, VGA cable and other wires are led into the chassis through the wire hole on the elevator panel, and then led out from the chassis wire hole (the wires in the elevator must be bundled with the internal wires of the machine).

5. Plug in the power supply to test the machine and observe whether there is any wire clamping. Projector lifter