Projector lifter series (for conference tables) The projector lifter series products are relatively mature products that our company has produced for many years. This series of projector lifters is the best supporting equipment for advanced multimedia conference systems.

According to user requirements, the projector lifter can be mounted flat on the conference table or suspended on the ceiling. The feature of this series of products is double automatic door switch, the double automatic door is hidden in the body when the projector is working; when the projector is not working, the double automatic door is closed and flat with the table or ceiling, which does not affect the beauty and flatness of the table and ceiling. The projector lifter series products are small in size, beautiful in appearance, easy to install, simple to operate, stable and reliable in operation. It can be controlled manually, remotely and centrally.

For customers with special requirements for such products, our company can tailor-made for you:

1. According to the projector lifter model, open the corresponding through holes and embedded holes on the table;

2. Carefully put the projector lifter into the hole, the lifter panel is level with the table;

3. The projection surface is directly placed on the lifting panel of the projector lifter;

4. Lines such as the projector power supply and VGA cable are led into the chassis through the wire hole on the lifter panel, and then led out from the chassis wire hole (the wiring inside the machine must be bundled with the internal wiring of the machine).

5. Plug in the power supply to test the machine and observe whether there is any wire clamping.