1. Accurately locate the installation position of the flat-panel TV on the installation surface. The positioning accuracy must be ensured and the hanger part of the installation surface must be fixed.

2. In general flat-panel TVs, the heat dissipation grid is usually designed on the back or the side back. Therefore, the back and the top, bottom, left, and right sides of the TV need a space for ventilation and heat dissipation. Keep a distance of at least 15 cm between the wall-mounted TV and the wall.

3. Since the various interfaces of the TV are basically arranged on the back, the various data lines cannot resist the excessive bending of the wall, otherwise it is easy to break.

4. The installation process needs to be cautious. When moving the whole machine, it should be handled with care, and bedding should be prepared to prevent scratches on the display screen.

5. According to the requirements of the installation manual of the rack, install it according to the steps.

6. If the display screen is connected to the speaker and the mounting bracket, pay attention to distinguish the left and right sides and the front and back.

7. If you need to connect the speaker cable, you should pay attention to the positive and negative polarity of the speaker cable to prevent the sound of the left and right channels from being reversed.

8. After the display screen is hung, it needs to be measured with a horizontal ruler. Adjust the bracket screw to make the display screen completely in a horizontal position. The translation error of the flat-panel TV installation position of the whole machine should be less than 1cm, and the left and right tilt error should be less than 1 degree.