Operation instructions for the central control of the LCD screen lifter 1. Basic operation: The lifter is raised, lowered, suspended and angle adjusted by the manual controller. 2. LCD TV lifter remote control operation: After the remote control writes the code, the lifter can be controlled by a single unit, a single group, multiple units, and multiple groups. 3. Remote control code matching method: Press the stop button (STOP) and the up button (UP) of the manual controller at the same time for 2 seconds, release when the power indicator of the lifter flashes slowly, and click on the back of the remote control with the pen tip E key for a few seconds, when the power indicator stops flashing, it indicates that the code is successfully written, and the elevator can be operated remotely. 4. Remote control code deletion method: press the UP button and STOP button of the manual controller at the same time, for a longer time (more than 3 seconds) when the power indicator of the lifter flashes quickly, release and release Immediately after that, press the STOP button (STOP) and the UP button (UP) at the same time. When the power indicator stops flashing, it indicates that the code deletion is successful. At this time, the remote control is invalid for lifting operations. 5. LCD TV lifter lifter grouping method: the lifter is equipped with central control software, there are 1 group ~ ~ 15 groups or 1 group ~ ~ 60 groups, the lifter must first select the corresponding group before grouping, in writing Code learning, each elevator can be divided into different groups at the same time, there is no conflict with each other.