LCD TV lifter installation method, this product is embedded with office furniture. To keep the desktop flat, the LCD TV is fixed on the machine with a bracket.

1. Measure the size of the elevator body first, then select the installation location of the conference table, and open the furniture according to the size of the elevator.

 

2. Accurate technical parameters are required when opening the furniture. Our company can provide a sample machine for opening holes to facilitate the accuracy of the opening size of the furniture.

 

3 Put the lifter from top to bottom into the pre-opened hole of the furniture, adjust the lifter support, so that the machine and the furniture are fully integrated.

 

4. Connect the VGA signal cable, manual control cable, and power cable.

 

5. Run the machine in an empty state, lift the machine out of the desktop mounting bracket and install the LCD screen, and connect the LCD screen power supply and signal lines after there is no abnormality.